WERE YOU LOOKING FOR THE 200NH WEBSITE AND LANDED HERE BY MISTAKE?

CLICK HERE TO BE REDIRECTED

 

 

QUALITY INSPECTED IN THE U.S.A.

 
 
BADGER HOME PAGE 105 PATRIOT 155 ANTHEM MODEL 200NH MODEL 350 ASPIRE PRO TC910 BREEZE 80-3N

   

 

 

AIRBRUSH 101
* INSTRUCTION BOOK
*REVIEWS
VIDEOS
* LINKS WILL BE ACTIVE SOON

 

 

 

 

 

COMPRESSOR FEATURES & FUNCTIONS
 
Piston type; oil-less compressor
Immediate pressure with continuous air flow
Thermal protection
Low noise, 47db
Automatic stop function

COMPRESSOR SPECIFICATIONS

Type: Single Cylinder Piston Compressor
Power: 1/6 HP
Speed: 1450/1750 r.p.m
Air output per min/litres: 20~23L/min
Auto stop, start at 43psi (3BAR), stop at 57psi (4BAR)
Pressure adjusts range: 0~4BAR
Suitable for airbrush with nozzle: 0.2~1.0 mm.
Net Weight: 8lb. 10oz. (3.9KG)
Dimension: 9 3/4”x 5 5/16”x 6 3/4”(245 x 135 x 170 mm)

OPERATIONAL INSTRUCTIONS

1. The AS180-12 air compressor has a 1/8’’BSP outlet with an attached 1/4” NPSM adaptor.


2.Attach airbrush to air hose; connect the air hose to the air compressor, plug into power supply. To start compressor,press power switch on top of compressor to “on”.


3. Check for air leaks. If the compressor frequently starts and stops there may be an air leak at one of the connections.Be sure airbrush to air hose and air hose to air compressor connections are firmly tightened.The use of PTFE tape on the connections will help prevent leakage.


4.There is a difference between maximum pressure and working pressure. A compressor’s maximum pressure is the highest pressure it can produce. When an airbrush is connected to the compressor and
activated,the compressed air initially released through the airbrush nozzle is the maximum pressure. In contrast, the working pressure is the
constant pressure the compressor will maintain while Airbrushing. The level of the working pressure depends on the diameter of the airbrush nozzle; the larger the nozzle, the greater the amount of air released, which will lower the compressor’s working pressure.

NOTICE

1.Always choose the appropriate air compressor with suitable air flow and pressure according to the actual working requirement.


2. Before connecting the compressor, check that the voltage is in compliance with the electrical requirements of the compressor motor.


3. Please follow local electrical regulations and safety precautions. If socket/adapter is used it must be grounded.


4. Never leave the compressor exposed to excessive dust, acids, vapors, explosive or flammable gasses or atmospheric agents (rain, sun, fog, snow).


5.The compressor must be used in suitable environments, well-ventilated with an ambient temperature between 41 degrees Fahrenheit (5°Ê) and 104 degrees (40°Ê)


6. Never use the compressor when bare foot;avoid contact with wet hands or feet.


7. Never allow children to touch the compressor while unit is in operation. Do not place any foreign objects in the compressor which may cause burns or electric shock.


8. Do not open or tamper with any part of the compressor without factory consultation. Questions regarding this compressor can be addressed to:


Badger Air-Brush Co.
9128 West Belmont Ave.
Franklin Park, IL 60131
www.badgerairbrush.com
Contact: 800-247-2787

.

WARRANTY

Your BADGER AIR-BRUSH CO. compressor is warranted from defects in material and workmanship for a period of one (1) year from date of purchase. A compressor failing within the warranty period due to defects in material and/or workmanship will be repaired or replaced (at Badger’s discretion) without charge to the purchaser when returned with proof of purchase to BADGER AIR-BRUSH CO. Transportation to Badger is pre-paid by purchaser. This warranty excludes compressors which have been subjected to corrosion,negligence,accident,or units which have been altered or abused in any way. All Badger products have a lifetime labor warranty.

 

 

 

 

 

 


Copyright © 2011 Badger Air-Brush Co. All Rights Reserved.